|
|
|
#1
10-08-2012, 06:18 PM
|
|||
|
|||
racer from ohio
My name is Steve. I built and designed my own chassis with cantilevered front shocks and a ford motorsports independant rearend. The engine is a 2.3 L turbo 4cyl. The WB and sholder height were scaled from an artist drawing of a fenderless street roadster with a strong simaliarity to a salt flats car. Hope to gain ability to build the body from alum and maybe share some of my chassis building knowlege. Its getting cold in my part of Ohio so Ill have more time in the shop.
LOOKING FWD TO SHAREING Steve
__________________
Steve Last edited by sbr66; 10-09-2012 at 06:34 AM. 
|
|
#2
10-08-2012, 06:24 PM
|
||||
|
||||
|
Steve, welcome and thanks for the introduction. Hope you enjoy the site and find it helpful. Thanks for joining us.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#4
10-09-2012, 08:01 AM
|
|||
|
|||
|
Welcome Steve, I have got some plans in the works for a TracK T with an all round tube frame. We used to race Mod 4's with the 2.3 ford. They are a very good engine. We used to buzz them 8200 RPM. We be looking for your posts. Steve
__________________
Steve never-ever kick a fresh turd on a hot day!
|
|
#5
10-09-2012, 08:31 AM
|
|||
|
|||
|
HI Steve welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#6
10-10-2012, 07:06 AM
|
||||
|
||||
|
welcome, your project sounds awsome want to share some pics?
__________________
Brent Click
|
|
#8
10-10-2012, 08:00 AM
|
||||
|
||||
|
Take a look at the instructions in the following link; http://allmetalshaping.com/forumdisplay.php?f=6
We have an album section under the "Community" in the blue bar under the big logo at the top of the page.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
 |
|
|
Linear Mode
