racer from ohio
 

My name is Steve. I built and designed my own chassis with cantilevered front shocks and a ford motorsports independant rearend. The engine is a 2.3 L turbo 4cyl. The WB and sholder height were scaled from an artist drawing of a fenderless street roadster with a strong simaliarity to a salt flats car. Hope to gain ability to build the body from alum and maybe share some of my chassis building knowlege. Its getting cold in my part of Ohio so Ill have more time in the shop.
LOOKING FWD TO SHAREING Steve

Steve, welcome and thanks for the introduction. Hope you enjoy the site and find it helpful. Thanks for joining us.

Hi Steve and welcome!:D

Welcome Steve, I have got some plans in the works for a TracK T with an all round tube frame. We used to race Mod 4's with the 2.3 ford. They are a very good engine. We used to buzz them 8200 RPM. We be looking for your posts. Steve

HI Steve welcome to the forum
Peter

welcome, your project sounds awsome want to share some pics?

posting pics
 

would like to post pics. i have many on cd. asked wife to help. she usually very good at this stuff. i lot better fabricator than computer geek.

Take a look at the instructions in the following link; http://allmetalshaping.com/forumdisplay.php?f=6

We have an album section under the "Community" in the blue bar under the big logo at the top of the page.