|
|
|
#1
01-30-2011, 01:27 PM
|
|||
|
|||
New Canadian
Hello
My name is Adam. I'm a CWB and TSSA cert'd welder. I live in Canada. I have done very very little metal shaping and forming. I'm planning on building myself an English Wheel. Once I get enough scraps at work for the anvils. And once I learn how to make the radii on the lower anvils. Cheers for now
__________________
-Adam- 
|
|
#3
01-30-2011, 02:30 PM
|
||||
|
||||
|
Hi Adam, you've come to the right place to find out all about English Wheels.
Welcome and enjoy the site.
__________________
Tom Poulter Follow the Dream - Sideways -  - But don't fall-off the edge'good to know you guys care' https://ctrestorations.com/
|
|
#4
01-30-2011, 08:28 PM
|
||||
|
||||
|
Adam, welcome and thanks for the introduction. Lots of good information here that you can use.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#6
01-31-2011, 06:40 PM
|
||||
|
||||
|
Welcome aboard Adam.
 You've found the right place to learn about shaping metal, you'll find answers to just about any question you can come up with around here. You've also got lots of company close by in the metalshaping community, as there's lots of members here from the Southern Ontario area. If you would like to do some hands-on reasearch before building your english wheel, you might want to join us down in Whitby in less than two weeks. We're getting together for a metalshaping weekend, and there will be a few different english wheels around if you want to try them out. Here's the link to our thread in the events forum: http://www.allmetalshaping.com/showthread.php?t=2597 Ken
__________________
Ken Has anybody seen that key I left in the chuck? See Ken's Metalshaping Gallery at: http://home.cogeco.ca/~kenb2/index.html Website updated June 2011
|
 |
|
|
Linear Mode
