|
|
|
#1
01-19-2017, 10:15 PM
|
|||
|
|||
Interested In Metal Shaping
My name is Bob Filetti. I have been working in the auto body industry for 40 years. I currently work at a collision shop. I have worked on 3 restoration jobs in the past. Two were Off the frame Jobs. I'm interested in working in metal shaping. I know Mike Phillips in Downingtown PA. I've seen some of the things he can do and I would very much like to that type of work.
__________________
Bob Filetti 
|
|
#2
01-20-2017, 03:20 AM
|
||||
|
||||
|
Welcome to the forum Bob, you have a head start on a lot of new members welding, shutlines, flow between panels all old school to you, you must have come up against that panel that not off the shelf and this is what we are at. Take it you've got all the hand tool ever needed, now you need to make so scrap, not much though. You just need a plan. Good luck with it, get your head around posting photos here, much easier then words to get a quick answer to a problem. Have fun.
__________________
Tom Poulter Follow the Dream - Sideways -  - But don't fall-off the edge'good to know you guys care' https://ctrestorations.com/
|
|
#3
01-20-2017, 04:42 AM
|
|||
|
|||
|
Hi Bob welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
