|
|
|
#1
04-29-2016, 04:11 AM
|
|||
|
|||
One more Austian member
Hi,
as far as I have seen there are only few members from my country here, so I will add one headcount here. I am working on some veteran cars in my spare time, and have found it very pleasing to do metalshaping in one way or the other to restore them to their original condition. I own two 1930s Tatra passenger cars, and two 1960 Fiats, plus some motorcycles. While hand tools are a good thing, for many applications machinery is quite handy, which is why I have acquired two Trumpf CNs and their tooling over time - I like them quite much. I am looking forward to learning from the Members here (which I already did by screening some threads) and hope I will be able to share one or the other own work. Cheers! Patrick
__________________
Patrick 
|
|
#2
04-29-2016, 05:46 AM
|
|||
|
|||
|
Welcome to the forum Patrick, nice to have you here. Visit often and post when you can.
__________________
Will
|
|
#3
04-30-2016, 04:09 AM
|
|||
|
|||
|
Hi Patrick welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
05-12-2016, 11:07 AM
|
||||
|
||||
|
Hello Patrick and welcome.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
 |
|
|
Linear Mode
