|
|
|
#1
02-03-2016, 06:35 PM
|
|||
|
|||
Introduction
Hello, Glad to be here and continue learning more about work that We enjoy! I am with way to many irons in the fire (both literally and figuratively!) but the main thing I am shaping on now is aluminum motorcycle tanks. I have a complete 1940 chevy pickup and a 1939 chevy cab & chassis so will have to make the bed and rear fenders. I came back here again today researching the DHC 2000 TORCH as I am no longer with access to tig and would like to go this route any way. I wish to thank all involved here and should have posted at least something long ago with gratitude because there really is a LOT here!! Tim
__________________
Tim Bowlby SW GA 
|
|
#2
02-03-2016, 10:44 PM
|
||||
|
||||
|
Hello Tim and welcome to the forum.
I sell the Cobra (DHC 2000) and related parts. If you have any questions give me a call 1-707-459-2523 or click on my web site below. Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
02-04-2016, 06:09 PM
|
|||
|
|||
|
Hi Tim welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#5
02-05-2016, 12:22 AM
|
|||
|
|||
|
Hi Peter, A tour in the U.S. Navy allowed My lucky self a weekend pass to Your beautiful city 1981 ( I see there is no old dude smiley to insert here ). Very glad to be here and Thank You also. Tim
__________________
Tim Bowlby SW GA
|
 |
|
|
Linear Mode
