#1
|
||||
|
||||
Marchant 4A for sale
I'm looking to sell one of my 4A Marchant air powered shrinker/stretchers. It works well with minimal air leaks. I will include 2 new piston cup seals for a future rebuild. I have it mounted on wheels for easy movement around the shop. This is one of the machines that I form 11 gauge angle and channels (frame rails) with.
NOTE: I will keep the tooling. It will be sold WITHOUT tooling. I will need to retain the jaws to interchange with the machine I will be keeping so I can switch between shrinking and stretching. Jaws can be purchased from sources on this site, or directly from Marchant, as well as occasionally on eBay. I'm asking $7,500 O.B.O. and would prefer pick up here in Rhode Island. Thanks, Bob
__________________
Bob Persson Last edited by BobPer; 08-25-2022 at 03:16 PM. |
#2
|
|||
|
|||
By "without tooling" do you mean without shrinker/stretcher jaws?
__________________
Marc |
#3
|
||||
|
||||
Marc, Yes, without the jaws. I will need to retain the jaws to interchange with the machine I will be keeping so I can switch between shrinking and stretching. Jaws can be purchased from sources on this site as well as occasionally on eBay. I hope this clarifies your question, and thanks for asking, Bob
__________________
Bob Persson |
#4
|
|||
|
|||
New tooling is also available from Marchant. They are back in business. I received a call from them a couple of weeks back looking to drum up some sales.
https://marchantmachine.com/
__________________
Rick Mammel |
#5
|
|||
|
|||
Quote:
I bought some dovetail ERCO blocks ... the mortise was welded onto and machined to dovetail. Welds visible.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
Thread Tools | Search this Thread |
Display Modes | |
|
|