#21
|
|||
|
|||
Navigational Regions?
Kent:
I really enjoy lurking and watching! Are the blue tape lines to delineate areas of lofting/valleys? Alternatively, are they paths for stretching? If I'm close on purpose, how do you delineate their locations? Good to know you are reaching the final 90%!
__________________
Hans iwand |
#22
|
|||
|
|||
Quote:
Tape lines = my own topographic "read" of the terrain, a fenced limit of adequately-worked contour adjoining the "insufficiently worked." With more lines added rather than moved. At the end of final 90% the tapes are cleaned off as the last of the straggling accuracies coalesce.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#23
|
|||
|
|||
I once saw something similar in a Czech film. His name is "Jáchyme, hoď ho do stroje " .
Mr. Koudelka is in love and knocked the rivet a little more. It is a parody from an ancient time when there were no parts in the carservice and nothing went normally. It's our humor - a thoughtful parody of not gags. Many people found their person in the film. Kent, I think you should succeed. https://www.youtube.com/watch?v=NGjBlwHvs0Y
__________________
Jaroslav |
#24
|
|||
|
|||
Quote:
Thanks Jaro, I wish that film were on DVD with English subtitles ... The French film "Dinner Game" is funny, too - as well as the Australian, "The Castle" - but neither one is about shop guys.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#25
|
|||
|
|||
Uncle Bud says 'nice thread'. He says that he continues to learn.
__________________
Will |
#26
|
|||
|
|||
Quote:
Please give Uncle Bud my best.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#27
|
|||
|
|||
Quote:
I found this post intriguing, I used 2 1/2" wide x 20" long, .060" 3003 marked as you described above. It is a great exercise in hammer control and die selection. 20200601_181159.jpg 20200601_181231.jpg With odd or excessive hit's on one side verse the other, it would easily skew the part. I corrected it by adjusting the form, with one end in a vise and the other end in a wide blade vise grip and twist.. I was able to go a full 180 deg twist, before I ran out of time at the shop today. It really high lights the issues you can have with tool control, especially on large panels, where you can't adjust the form as easy, with a pliers and a vise. When I have a little more time, I will go for a full 1 turn twist Bill
__________________
Bill Tromblay "A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine. Last edited by BTromblay; 06-01-2020 at 06:41 PM. |
#28
|
|||
|
|||
Quote:
Think I may try it I wonder how it will come out with 20ga.????
__________________
Dave Bradbury |
#29
|
|||
|
|||
"Upon further review" like Bob Uecker of the Milwaukee Brewers baseball would say, I have more to correct on my panel. A cross section cut of my part would show a curve, instead of a straight. It took several re-reads of the post, to catch this detail.
More to do and learn. B
__________________
Bill Tromblay "A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine. |
#30
|
|||
|
|||
Quote:
Nice effort, Wm. Here is an image that represents the shape accurately, using linear elements. P1030993 copy copy.jpg
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
Thread Tools | Search this Thread |
Display Modes | |
|
|