#1
|
|||
|
|||
Wanted: Erco 1447
I’m looking for a Erco 1447 in good condition complete with both shrinker and stretcher die sets. I’m located in Miami but can drive if it’s not more than 500 miles or else pay freight shipping.
__________________
Ed Foden |
#2
|
|||
|
|||
So I scored this Erco over the weekend locally in Florida! Needs some cleaning up but he had 2 new sets of dies. What I need now is a set of stretcher base/pressure blocks…anyone have a used pair?
4D68702E-082D-4BB3-84E5-6E440356F3C6.jpg
__________________
Ed Foden Last edited by galooph; 02-15-2023 at 03:26 AM. |
#3
|
|||
|
|||
Ed, if you have a plan to take it apart to give it a refresh, note that the set screws that retain the pivot shafts are doubled up. There is a locking set screw on top of the main set screw.
__________________
Rick Mammel |
#4
|
|||
|
|||
Thanks for that info. Yes the plan this week is to take it apart and blast the base and head, fresh paint, new name and serial plates, polish up the dies, blocks etc. It came with the full standard shrink assembly and two aftermarket sets of new dies shrink and stretch. I’ll need pressure blocks for the stretch dies but I feel I got a very good deal plus no shipping!
__________________
Ed Foden |
Thread Tools | Search this Thread |
Display Modes | |
|
|