#1
|
|||
|
|||
Rumley tractor
Just a couple pics of the radiator I’m building for a 1918 Rumley Do All tractor.got to use my Trumpf I just picked up to offset the tank edges.Not the most perfect edge but not bad for my first go at it,besides the customer wants the rad to look a 100 years old so I get to build my first relic.
[IMG]http://www.allmetalshaping.com/picture.php?albumid=1
__________________
James S |
#2
|
|||
|
|||
Nice , what did you use to shrink the edges ?
__________________
Dave |
#3
|
|||
|
|||
I have a set of Shrinker and stretcher machines.They are the hand ones that I just put an air cylinder kit from Mittler brothers on.
__________________
James S |
#4
|
|||
|
|||
Looks good so far. Maybe go for a faster stroke speed to lose that crinkly edge and spray some thin oil on to let the part pass through easier. Please don’t take that as criticism but something that might help next time.
__________________
Gareth Davies |
#5
|
|||
|
|||
Yeah,the second side panel I did raise the speed a little.It came out better.I’m learning as I go any points are welcome.
__________________
James S |
Thread Tools | Search this Thread |
Display Modes | |
|
|