#21
|
|||
|
|||
It is enough to have a steel corner and rearrange it. Likewise, the outer radius. The rear edge should be bent 2mm closer to the front because it will not fit into the bracket on the back of the car. Good job.
__________________
In the morning I was convinced that this was the only solution. Witold https://photos.app.goo.gl/VTz6ETWQhnKyqUQYA https://www.youtube.com/watch?v=hzcKlFjOAoE http://forum.poziome.pl/index.php?topic=1989.0 |
#22
|
||||
|
||||
Very tidy work Bill!!
__________________
Robert Instagram @ mccartney_paint_and_custom McCartney Paint and Custom YouTube channel |
#23
|
|||
|
|||
Thank you gents for the kind comments. Some more images showing progress.
The fitment check, with a little tweaking it lined just nicely. Spot welded into place. The attached top piece with a coat of etch prime. The toolbox lid test fit. The latch and screw holes all lined up as intended, phew!
__________________
Bill Mullen |
#24
|
|||
|
|||
Nice to have you back Bill,
Cheers Charlie
__________________
Why does dust stick to everything, but nothing sticks to dust? |
#25
|
|||
|
|||
Thanks Charlie.
__________________
Bill Mullen |
Thread Tools | Search this Thread |
Display Modes | |
|
|