#1
|
|||
|
|||
Sculptor in Raleigh, NC
I shall have to come back and write a longer introduction this evening. Just had a family problem come up.
Great to find this group on line through the YouTube videos! Joel Haas, 3215 Merriman Ave Raleigh, NC 27607 www.sculpturewalk.org www.joelhaasstudio.com
__________________
Joel 01sclptrjoel |
#2
|
|||
|
|||
Welcome, Joel,
More than a few sculptors/artisans in the mix here.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#3
|
|||
|
|||
Welcome,
I'm not far from Raleigh. Lot's of good information and advice to be found here. Dave
__________________
Dave Deyton |
#4
|
|||
|
|||
Hi Joel welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
Thread Tools | Search this Thread |
Display Modes | |
|
|