All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Miscellanous products related to metalshaping
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-27-2023, 12:18 PM
SamAbe SamAbe is offline
Member
 
Join Date: Feb 2022
Location: Chicago, IL
Posts: 9
Default Clear Coat Products For Steel Outdoors

What have you used? Which ones do you prefer?



I make steel sculpture, and have been a tad overwhelmed at the variety of different clear coating options available. I want a clear coat that can go on bare steel, and can hold up to the elements outdoors.



I like the products from Sculpt Nouveau, their Hydro Clear and Ever Clear. What bothers me is that these require mixing and have a limited working time. I'd much rather have something that is ready to spray, so I don't have to worry about wasting $$$ if I don't use the whole thing. These seem a bit pricey but I have little reference.



Flood Penetrol is far cheaper, requires no mixing, and is supposedly good for outdoor applications, but are there downsides? Would this be not so environmentally friendly for a garden sculpture for example?



What else should I check out?
__________________
- Sam
Reply With Quote
  #2  
Old 04-28-2023, 03:52 AM
Jaroslav Jaroslav is offline
MetalShaper of the Month April 2020, September 2021, November 2022
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 2,572
Default

For exhibition purposes, I use acrylic topcoat for metallics. After degreasing.
It covers perfectly and it is possible to repair damaged areas.
I don't know what he will do outside.
It was created after many people stroked samples of my work.

Make sculptures from stainless steel and you have no problem...
__________________
Jaroslav

Last edited by Jaroslav; 04-28-2023 at 04:36 AM.
Reply With Quote
  #3  
Old 04-28-2023, 09:42 AM
DarkLightning DarkLightning is offline
Member
 
Join Date: Jul 2020
Location: Simi Valley, CA
Posts: 156
Default

300 series stainless is certainly a solution.

As for regular types of steel, I'd try automotive clear coat(s). I have some Paint Shop clear lacquer in matte and gloss which seem to hold up well. Purchased at an O'Reillys parts store. It's not catalyzed, so there would be minimal waste. Might have to wax it periodically?
__________________
~Steven
Reply With Quote
  #4  
Old 04-28-2023, 05:43 PM
drivejunk's Avatar
drivejunk drivejunk is offline
Member
 
Join Date: Apr 2018
Location: Springdale, AR USA
Posts: 241
Default

Outdoor coatings for any purpose that require mixing and have a potlife offer significantly greater performance than ones that don't. My suggestion for best results is to use a light application of a single component product to protect parts as they are produced. Then after assembly, a full overall application of a catalyzed product.
__________________
Matt
Reply With Quote
  #5  
Old 04-30-2023, 07:15 PM
scranm scranm is offline
Member
 
Join Date: Jun 2009
Location: Indiana
Posts: 289
Default

https://www.kbs-coatings.com/diamondfinish-clear.html
__________________
Mark
Reply With Quote
  #6  
Old 06-03-2023, 11:27 AM
Adam H Adam H is offline
Member
 
Join Date: Apr 2018
Location: Southern California
Posts: 32
Default

https://www.everbritecoatings.com/pr...SAAEgK6mPD_BwE
__________________
Adam Hebb
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.