Quote:
Originally Posted by Charlie Myres
Yes it will! Any two dissimilar metals in contact when wet, will start electrolysis.
If you put a thin film of silicone rubber between the two when they are joined, it will prevent any electrolysis.
Nice work on the car; it is one of my favourite reads!
Cheers Charlie
|
Quote:
Originally Posted by AllyBill
If you put a thin film of silicone rubber between the two when they are joined, it will prevent any electrolysis.
Better still, use an aerospace-grade polysulphide and you'll never have to look at it again.
Will
|
Charlie and Bill: Thanks for info! I stand corrected and will make sure I put some material between these metals to prevent problems.