What type tool you have for bending 90 degrees ?

[Jaroslav]

What type tool you have for bending 90 degrees 10 - 15mm bend height on the shape piece. Edge position for wire and the like. For pullmax or Eckold. I want to build an edge and do not want to use a bead roller.
Please give me advice, I do not want to invent it anymore.

[longyard]

A picture or drawing might help us understand Jaroslav.

[Jaroslav]

Bill. I want to put the hem 90 degrees. In any shape - sheet cutout. I want a universal tool for Eckold or Pullmax or some home product.
I have a bead roller, but I want it another way.
I have a picture of the situation when I used a manual method for wire laying. I hope you used it in your book .....


http://allmetalshaping.com/showthread.php?t=16494

[Jaroslav]

DSC031561.jpgBill, I have this foto. Only for first step and degree 90.

[route56wingnut]

Originally Posted by Jaroslav

Attachment 45673Bill, I have this foto. Only for first step and degree 90.

Pullmax makes a flange tool but is a dedicated flange height. With your machining skills you could do the corrections and have a few tools marked with the height you are looking for. Bill Longyard you should show a picture of what we discussed the other day

[Jaroslav]

Okay, Dan, you can give a photo of that tool. I can produce, but I do not have the idea what kind. When I do not know, I'll ask. As far as I know, I give advise. Eckold has a stroke of 8mm. Thank you for your advice.
I have beautiful machines and a lot of equipment and this (THIS) I'm doing a mallet (MALLET) or hammer. I'm sad because I do not know how diferently way.