#71
|
|||
|
|||
Hey everyone, thanks for the advice fellas.I will definitely do some more research before final placement of panhard bar. In the meantime I finally managed to complete all the metalwork and rust repairs on the body shell. Slathered the interior and trunk,wheelwell,and roof with a thick coat of epoxy primer. Seamsealed all areas and may put on another coat of epoxy or bedliner, not sure yet. Started putting doors back together, and broke down the hinges for rebuilding. Here's the pics!
__________________
Devin |
#72
|
|||
|
|||
Panels look good all painted up and sealed.
Good video on panhard set up https://youtu.be/liR1--EHMg8
__________________
- Tom D |
#73
|
|||
|
|||
Looking good Devin.
__________________
David Hamer |
#74
|
|||
|
|||
Hey everyone, been a minute, since my last post. After a long winter of work got henryj back in one piece.
Mostly consisting of filling,blocking, priming, rinse and repeat a couple times.one more blocking and should be ready for paint. Car now runs drives and stops! Still need to source lots of parts,so owner has take it home for the summer, once he gets his parts and rebuilds his funds a little will probably be back. Anyway here are a few pics. Thanks for now guys!
__________________
Devin |
#75
|
||||
|
||||
Looks so tough!
__________________
Marcus aka. Gojeep Victoria, Australia http://willyshotrod.com Invention is a combination of brains and materials. The more brains you use, the less materials you need. |
Thread Tools | Search this Thread |
Display Modes | |
|
|