#31
|
||||
|
||||
Thanks David
I am a bit nervous about all my mistakes to come. But I'm not letting that stop me.
__________________
Greg Alderding (Brisbane Queensland) "Challenges are where the satisfaction hides" Always learning and expanding |
#32
|
||||
|
||||
Made a little more progress on the front of the buck and I have decided on the approach for the hinge mount structure. I still have a long way to go.
__________________
Greg Alderding (Brisbane Queensland) "Challenges are where the satisfaction hides" Always learning and expanding Last edited by galooph; 05-31-2021 at 06:09 AM. |
#33
|
||||
|
||||
I just received the foam for the dash to comply with the QLD head strike rules. I have some cheaper (non legal) foam I plan to use as a trial run first. But both the trial run and final dash are both jobs a fair way down the track. My next priority is to finish securing the rear end of the buck so I can pull the buck off and fit all the mechanicals to the chassis. This may sound premature but it is the only way to ensure the wheel arch is positioned accurately around each wheel.
__________________
Greg Alderding (Brisbane Queensland) "Challenges are where the satisfaction hides" Always learning and expanding |
Thread Tools | Search this Thread |
Display Modes | |
|
|