#1
|
|||
|
|||
Dimple Dies-4140 set of 3 $100.00
If any of you guys are looking for dimple dies you can check out my site at www.straightlineinnovations.com . The 3 sizes in the set are 3/4 inch 1-1/4 inch and 1-3/4 inch dies. These dies are made on a CNC lathe and the material is 4140 so they should last a long time if taken care of. You can also view them here http://s1212.photobucket.com/albums/cc455/57chevy2000/
Thanks to all, KyleNicks- Straightline Innovations
__________________
Kyle Nicks |
#2
|
||||
|
||||
i ordered some! expecting them today!
do you make other sizes? thanks mat --UPDATE-- i did get them today! thank you... now i dont have to spend hours making my own and can focus on customer work.. lol
__________________
------------- Mat , the one and only ... ______ Last edited by McClary; 05-13-2011 at 01:50 PM. |
#3
|
|||
|
|||
Other sizes
For those of us with Greenlee or HF punches, our hole punches are pipe or conduit sizes - not nominal. You might look at building some to fit those sizes.
__________________
John Ron Covell, Autofuturist books (Tim Barton/Bill Longyard) and Kent White metalshaping DVD's available, shipped from the US. Contact lane@mountainhouseestate.com for price and availability. |
#4
|
|||
|
|||
How thick of metal are they rated for as I do alot of 12-14 guage also?Dan
|
#5
|
|||
|
|||
Mat, thanks for the order buddy! As of right now I only make the 3 sizes but maybe in the future I can make more sizes.
Thanks for the Idea John! Dan you can try whatever you want ,it will mostly depend on the size of the press you use. The pictures in the link I posted show a piece of metal that I dimpled with each die and it is 0.100 thick. Thanks Guys, Kyle
__________________
Kyle Nicks |
#6
|
||||
|
||||
Something like this makes it very easy for those of us with out a press.
http://www.youtube.com/watch?v=oNS5xQnDoJo
__________________
CJ Dansie |
#7
|
|||
|
|||
CJ , can that tool be used with my dies if they were made with a hole in the male die??
Thanks, Kyle
__________________
Kyle Nicks |
#8
|
|||
|
|||
Just letting you guys know that I had to raise the price of the die sets to $125.00 due to tooling and material costs. Any questions?? you can contact me at straightline03@aol.com
Thanks, Kyle
__________________
Kyle Nicks |
Thread Tools | Search this Thread |
Display Modes | |
|
|