#1
|
|||
|
|||
New member from Vancouver Island
It’s a cold night in Canada, even here on the west coast.
I am very happy to be here on AllMetalShaping.com. I’m not new to metal working and shaping. I’ve been doing it for more than 30 years but only very slowly and gradually achieved any success, however moderate. I’m always looking to learn something new and open to learning ways to improve my current methods. My home based business caters to early Fords, almost exclusively, and I’m grateful to have work waiting in the wings. I’m lucky to work with some great, patient and understanding customers. My specialty is 32 frames and chassis, usually for Model As but even for the odd 32 Ford believe it or not. My shop space is limited but still workable, though equipment constraints are real. I do own and use a Kent White pneumatic power hammer, at MB electric bead roller as well as a Pullmax P8 which I use regularly (great tool). Oh, and I’m one of 3 guys here on the island that drop early Ford axles. I post photos of current projects now and again on Instagram under @victoryrodandcustom. I’m here to learn. Looking forward to it.
__________________
Jeremy Mang I build hot rods with early sprint car and Indy roadster influences... cause there’s nothing cooler! |
#2
|
|||
|
|||
Welcome to the community, Jeremy
__________________
- Tom D |
Thread Tools | Search this Thread |
Display Modes | |
|
|