All MetalShaping

Go Back   All MetalShaping > Miscellaneous stuff you need to know > Announcements
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-31-2018, 07:29 PM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,082
Default Not contemporary metal shaping, but I am pumped again!

I was notified earlier this morning that Jeffry Earnhardt will be using my old paint scheme for this weekends 'throwback' race at the Darlington superspeedway, just down the road here in south Carolina. This is the second year in a row that my original Dale Earnhardt, Sr. paint scheme has been selected. Dale Jr. and Jeff Burton were discussing the reason that the numbers were done the way that they were, and I don't want to tell them that it was because I did not get the car done in time to arrange for a sign painter, so I used two different size paint and storage can and assorted width tape to paint them on myself. The pictures below are of the original paint scheme, last year at Darlington and this years presentation. I actually did a lot of metal work on these cars back in that day, but not in the way that I have been exposed to since joining this site.

dale01.jpg

Darlington-XFINITY-Throwback-2017.jpg

Jeffrey-Earnhardt-2018-Darlington-.jpg
__________________
Will
Reply With Quote
  #2  
Old 09-01-2018, 07:37 AM
Kyle_yocum Kyle_yocum is offline
Member
 
Join Date: Apr 2018
Location: Sunbury North Carolina
Posts: 34
Default

This is awesome! Congratulations my friend
__________________
Kyle
Reply With Quote
  #3  
Old 09-01-2018, 08:28 AM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,548
Default

Good to see your paint scheme lives on! Congrats Will!
__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #4  
Old 09-01-2018, 09:09 AM
Steve Hamilton's Avatar
Steve Hamilton Steve Hamilton is offline
ADMINISTRATOR MetalShaper of the Month Dec. '09 & May '11
 
Join Date: May 2009
Location: Fond du Lac WI.
Posts: 1,986
Default

Congrats Will, that is really cool!

When under pressure, you do what ever it takes to get it done!
__________________
Steve Hamilton
Hamilton Classics
Auto Restoration & Metalshaping
Reply With Quote
  #5  
Old 09-01-2018, 11:00 AM
Gando Gando is offline
Member
 
Join Date: Feb 2010
Location: Concord N.C.
Posts: 109
Default

The graphic artist in me loves the arrangement and the craftsmanship!
You are way more talented than you give yourself credit for!

THREE FOR DALE!!!!!......in a #96 sorta way

Gando
David Gandy
Concord NC
Reply With Quote
  #6  
Old 09-01-2018, 03:42 PM
crystallographic crystallographic is offline
MetalShaper of the Month October '14 , April '16, July 2020
 
Join Date: Dec 2010
Location: Western Sierra Nevadas, Badger Hill, CA
Posts: 3,693
Default rare excellence

Will,
I have met very few people who could tackle those race machine problems with the results you have gotten. I intend to follow Kevin Costner's tin cup example and spend more time at the Waffle House ...
__________________
Kent

http://www.tinmantech.com

"All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919.
Reply With Quote
  #7  
Old 09-01-2018, 07:15 PM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,082
Default

Hey, guys, I just got back from the track. Young Jeffrey had a brush against the wall in the afternoon practice, I did not get a chance to get that replica photo made with him on pit road. While they were stripping off the right rear quarter panel/trunk items, I put down my camera and nap sack and picked up some of the wadded-up crush panels that they had taken out and they were pleasantly surprised to find that I had straightened out five of the seven panels before they began to look for them to repair. There are no sheet metal facilities at the track, so a lot of the damage has to be repaired right there in their garage stall with only about 6 feet in between the cars. They are mostly 2D curved panels with edges and a few lips, so it was not a difficult job, but I think I impressed them with how fast they had been repaired. I've been invited to their shop in the near future and will take a look at their sheet metal shop equipment. Anyway, here are a few pictures that I took. I did not want to get in their way or look like a spectator.

The Darlington race track provided me garage pass credentials to get some comparative photos taken regarding Dale Sr. and his grandson race car photos and because it did not happen today, they will be upgrading my credentials to actually allow me to be on pit road and in the pits for the actual race tomorrow. It's been a long time, but I really enjoyed the familiar aroma of the race fuel, race motor exhaust and burning rubber, but not so much the near 100 degree temps in the deep South's sunny afternoons.

DarlingtonSat 007.jpg

DarlingtonSat 008.jpg

DarlingtonSat 009.jpg

DarlingtonSat 010.jpg

DarlingtonSat 012.jpg

DarlingtonSat 015.jpg

DarlingtonSat 016.jpg

DarlingtonSat 017.jpg

DarlingtonSat 018.jpg

DarlingtonSat 019.jpg

DarlingtonSat 020.jpg

DarlingtonSat 021.jpg
__________________
Will
Reply With Quote
  #8  
Old 09-01-2018, 10:54 PM
BTromblay BTromblay is offline
MetalShaper of the Month August 2018
 
Join Date: Oct 2015
Location: Mukwonago, Wi
Posts: 432
Default

Hi Will,

Congratulations on the paint work, have fun tomorrow at the track.

Bill
__________________
Bill Tromblay

"A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine.
Reply With Quote
  #9  
Old 09-01-2018, 10:59 PM
Mike Rouse Mike Rouse is offline
Member
 
Join Date: May 2009
Location: Baton Rouge
Posts: 403
Default

Congratulations Will you are a part of the history of NASCAR.

Mike
Reply With Quote
  #10  
Old 09-02-2018, 06:37 PM
Peter Tommasini Peter Tommasini is offline
MetalShaper of the Month May 2013, Dec 2013
 
Join Date: Apr 2011
Location: Melbourne,Victoria, Australia
Posts: 7,734
Default

Well done Will you should be proud
Peter
__________________
P.Tommasini

Metalshaping tools and dvds
www.handbuilt.net.au

Metalshaping clip on youtube
http://www.youtube.com/watch?v=WEAh91hodPg

Making Monaro Quarter panel:
http://www.youtube.com/watch?v=KIpOhz0uGRM
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.