#1
|
|||
|
|||
Pitting Limits
I just got a couple fenders back from chemical strip and rust removal. The result is that there are a lot of inclusions left in the surface. There are several areas with pin holes which I know need to be replaced. I will also assume that areas with inclusions will need to be replaced. My questions is whether the pitting that does not have inclusions is safe to keep? I would assume the rust removal was effective in those areas and it is good to go from that perspective.
Inclusions Pitting without inclusions
__________________
- Tom D |
Thread Tools | Search this Thread |
Display Modes | |
|
|