All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-23-2021, 02:31 PM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default 41 Chev pickup build

I've owned this 1.5 ton cab and chassis "41 chev for around 11 years. I've been a little reluctant to start it, as it just seemed like a large rust job. Anyway, I've started it.
What I plan on, is to drop the cab onto a half ton chassis, channel the cab 3", roof chop 2", internal hinges and remodel the front sheetmetal. It took me around a week to dismantle the cab, so it could go into the citric bath. (Thanks Marcus) That gave me relatively clean steel to work with. I've started with the floor, which I've made as the original didn't suit my purposes.

Attachment 59177
This is 2mm electrogalv, which is folded up to suit the seats.

Name:  20200625_175355.jpg
Views: 2204
Size:  64.2 KB
Started on the under floor sub frame
__________________
Chris Woolley

Last edited by chrisnz; 03-31-2021 at 12:58 PM. Reason: omitted picture
Reply With Quote
  #2  
Old 03-23-2021, 06:30 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,130
Default

Hmm, it appears that this picture was taken down under.
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.

Last edited by Jack 1957; 03-24-2021 at 12:30 PM.
Reply With Quote
  #3  
Old 03-23-2021, 09:31 PM
onya onya is offline
Member
 
Join Date: Feb 2016
Location: Australia
Posts: 140
Default

Close enough mate NZed
__________________
Leigh,

Stop moving so fast, you're creating a breeze.
Reply With Quote
  #4  
Old 03-24-2021, 11:11 AM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default

What gave it away? The welder
__________________
Chris Woolley
Reply With Quote
  #5  
Old 03-24-2021, 11:50 AM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default

In New Zealand, vehicles have to be certified to go on the road. This pickup will be classed as modified production.

Attachment 59189
Incorporated into the floor, are doubler plates for the seats and seatbelt mounts

Attachment 59190

Name:  20200718_140707.jpg
Views: 1824
Size:  59.5 KB
Once I'd welded the floor up, the subframe was then welded to the firewall mount.
__________________
Chris Woolley
Reply With Quote
  #6  
Old 03-25-2021, 04:23 AM
Gojeep's Avatar
Gojeep Gojeep is offline
MetalShaper of the Month March 2015, March 2020,, June 2022,Aug 2023
 
Join Date: Nov 2013
Location: Eastern Melbourne, Australia
Posts: 2,985
Default

Looking forward to following this build.
__________________
Marcus
aka. Gojeep
Victoria, Australia
http://willyshotrod.com

Invention is a combination of brains and materials.
The more brains you use, the less materials you need.
Reply With Quote
  #7  
Old 03-25-2021, 10:09 AM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default

I'm certainly not computer literate. Here are the missing photo's. A lot of my other photo's were coming out upside down, so I guess you won't see them

Name:  20200706_163009.jpg
Views: 1635
Size:  69.8 KB
Crush tubes in for the rear cab mounts

Name:  20200706_163034.jpg
Views: 1683
Size:  56.7 KB

Name:  20200707_125631.jpg
Views: 1724
Size:  74.2 KB

Name:  20200616_153713.jpg
Views: 1795
Size:  78.7 KB
__________________
Chris Woolley
Reply With Quote
  #8  
Old 03-26-2021, 08:08 AM
dwmh dwmh is offline
MetalShaper of the Month May 2018, July 2022
 
Join Date: Aug 2015
Location: Nr Oxford UK
Posts: 659
Default

Hi Chris, hope I'm not stating the obvious, but you don't want to be breathing galvanised steel welding fumes.
Looks like you're going to be busy for a while.
__________________
David Hamer
Reply With Quote
  #9  
Old 03-26-2021, 02:11 PM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default

Quote:
Originally Posted by dwmh View Post
Hi Chris, hope I'm not stating the obvious, but you don't want to be breathing galvanised steel welding fumes.
Looks like you're going to be busy for a while.
No precautions taken. Do I need a respirator or an exhaust fan? I will be busy, but I just focus on the day, not the entirety
__________________
Chris Woolley
Reply With Quote
  #10  
Old 03-27-2021, 09:49 AM
dwmh dwmh is offline
MetalShaper of the Month May 2018, July 2022
 
Join Date: Aug 2015
Location: Nr Oxford UK
Posts: 659
Default

Hi Chris, I'm no expert, so I have copy and pasted from a welding website.

When welding galvanised steel, a respirator is required so that the zinc oxide fumes from the galvanising are not inhaled. Inhalation of zinc oxide fumes can cause metal fume fever. This acute overexposure to zinc oxide through the respiratory system causes flu like symptoms that can be severe.
__________________
David Hamer
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 11:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.