#1
|
||||
|
||||
!!!!read first!!!!read first!!!!read first!!!!
If you are new and think you are ready to join in on the fun here on AllMetalShaping.
Please do us a favor and make sure you have filled out all of your requirements before you enter your introductions. TO RECAP, YOU NEED TO DO FOUR THINGS: 1- Go to your User CP (top blue bar above this, left hand side) 2- Enter your location and other profile information 3- Put at least your first name in the signature Then after all that is done now you can..... (4) Post an introduction in the introduction forum. The introduction should be more than just a 'New guy here' thing. Your introduction should include your first name, a Brief history, and why you want to be a Member. If you do not fill in the requirements you will not be approved Help us out here we would rather be hammering on some metal then trying to help all of the new members fill in the requirements.
__________________
Johnny Arial This forum is dedicated to Metal Shaping. Please stay on topic. Last edited by Steve Hamilton; 02-03-2017 at 03:47 PM. |
#2
|
||||
|
||||
!!!!read first!!!!read first!!!!read first!!!!
Your introduction should contain the following:
Your name, where you are located, a little about yourself and why you want to be a member here. Example, My name is Joe and I live in Pass Christian, Ms. I am new to metal shaping and have a Model A that I want to restore. Hope to learn more about how to make the panels I will need for my project. Also want to see how others make their panel and the tools they use. Thanks for making it easy for us to approve your membership.
__________________
Joe Hartson There is more than one way to go to town and they are all correct. Last edited by jhnarial; 12-18-2011 at 08:04 AM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|