|
|
|
#1
09-04-2012, 12:21 PM
|
|||
|
|||
Howdy from Minn.
A good friend of mine, Terry is a master metal man. I have watched him for years and also watched videos he has lent me. My hobby is building hot rods and drag cars. Mainly I like the chassis fabrication. Now, at the ripe old age of 71 I thought I might try a little metal shaping. Just testing the theory that you are never too old to learn.
|
|
#2
09-04-2012, 05:29 PM
|
|||
|
|||
|
HI Bob welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
09-04-2012, 09:21 PM
|
|||
|
|||
|
barry larson
Bob Barry up hear in Anoka. You must belong to MSRA.....If you need to shape some metal some day i will put the pot on and we can bend something up....about the same age and play in the shop most every day....L-178 will get you phone no
__________________
Barry Larson
|
|
#6
09-05-2012, 01:10 AM
|
|||
|
|||
|
Hi Bob, welcome to the forum.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#7
09-05-2012, 08:56 PM
|
|||
|
|||
|
Thank you for the friendly welcome everyone.
Barry, many years ago I went to your house to have you drill some Mustang rotors. Instead, you lent your drill guide to me, a stranger. I'll always remember that. Through the years we have talked briefly, most recently a few years ago in the GSTA show hospitality room, about your Bonneville experiences. Thank you for your offer of help on future metal bending I might attempt. Bob MSRA #402
__________________
Bob
|
 |
|
|
Linear Mode
