#71
|
|||
|
|||
Quote:
Awesome! Very helpful. Thanks for the info, Scott.
__________________
- Tom D |
#72
|
|||
|
|||
Drivers side door top jig saw puzzle and lots of holes to fill in.
Working out were to cut door frame off.
Time to fill some of the holes in. I had to make a part to fill in the 60mm gap in the door top. Profile gauge from aluminium sheet. Top tooling to form part. Bottom tool. Practice part only about 20mm long. Folded edge to guide sheet through form tool. 1st pass through form tool. About the 5th pass. Folding the outside edge up by hand. Finished part not trimmed to length yet. Part welded in. Lots of cuts had to be made to match the top of the door frame to the bottom of the door after taking 114 mm out. Filling the outside gap in and welding the frame together. Top completed. Time to get rid of the pesky holes from some one putting a truck mirror on. Last 2 holes Finished for now onto the passengers side.
__________________
Scott |
#73
|
|||
|
|||
I'm enjoying this...You are at one with the metal!
__________________
Chris |
#74
|
||||
|
||||
Very nice.
|
#75
|
||||
|
||||
Nice attention to detail there.
__________________
Marcus aka. Gojeep Victoria, Australia http://willyshotrod.com Invention is a combination of brains and materials. The more brains you use, the less materials you need. |
#76
|
|||
|
|||
What did you use those forming dies in? Was it a press?
__________________
- Tom D |
#77
|
|||
|
|||
__________________
Scott |
#78
|
|||
|
|||
Yeah just a hydraulic press.
__________________
Scott |
#79
|
|||
|
|||
__________________
Scott |
#80
|
||||
|
||||
Wow, that makes it even more impressive! I thought you were using a Pullmax or similar.
__________________
Marcus aka. Gojeep Victoria, Australia http://willyshotrod.com Invention is a combination of brains and materials. The more brains you use, the less materials you need. |
Thread Tools | Search this Thread |
Display Modes | |
|
|