|
|
|
#1
06-16-2018, 10:27 AM
|
|||
|
|||
Hi from BC
Hi guys and gals,
My name is Wayne and I'm from the sunshine coast of BC, Canada. I have been a welder/fabricator for about 4 years now. I started out working on heavy equipment but quickly transitioned to what I really wanted to do which was motorsports. The last few years I have been doing mainly rally cars. Mostly roll cages, suspension, exhaust and some body repair as they see the ditch fairly often. I am becoming a member here because I find metal shaping super interesting but it is something I haven't had the opportunity to do much of yet. I know there is a ton of knowledge and experience here and I would love to suck up as much of that info as possible. I've got lots of ideas and hopefully you guys can help me waste a lot less metal. Thanks, Wayne
__________________
Wayne 
|
|
#2
06-16-2018, 02:05 PM
|
|||
|
|||
|
Welcome to the forum Wayne. There’s always plenty to see and get inspiration from on here. Post some photos of your work.
__________________
Gareth Davies
|
|
#3
06-20-2018, 04:51 AM
|
|||
|
|||
|
Hi Wayne welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
06-20-2018, 06:57 AM
|
|||
|
|||
|
Welcome to the forum, Wayne.
__________________
AC Button II http://CarolinaSculptureStudio.com https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel
|
|
#5
06-20-2018, 04:43 PM
|
||||
|
||||
|
Hi from BC
Welcome to the forum, Wayne, from a fellow Canuk in the middle of the country.
__________________
John S. E _________________________________________________ Torque is nothing, unless you can get it to the road.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
