|
|
|
#1
02-16-2016, 04:01 PM
|
|||
|
|||
Hey all...
I am a newbie and I have a very general question:
What would be cheaper to fabricate? 4 pieces (shaped like pieces of pizza or one round piece? Regardless of material, they both would be the same. I am just wondering which would be cheaper to fabricate. I have been told the more detailed the stamp the more money. Dickie 
|
|
#2
02-16-2016, 05:01 PM
|
||||
|
||||
|
Welcome to AllMetalShaping Dickie.
We need a bit more info. Is this flat material? How much crown? Diameter? Generally a bowl is about simplest thing there is to make. Stretch the center, shrink the edges, smooth and blend. Repeat until you've got the shape you want.
__________________
Kerry Pinkerton
|
|
#3
02-16-2016, 05:59 PM
|
|||
|
|||
|
Hi Dickie welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
02-17-2016, 03:42 PM
|
||||
|
||||
|
Hello Dickie and welcome to the site.
Your question would be easier to answer if you show us a picture of the shape you are after. I have a fellow from your area coming to my class this weekend. Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
