|
|
|
|
|
#1
04-12-2012, 09:18 PM
|
|||
|
|||
Huge HI from Down Under!
Hi everyone, I am Matt and live in a tiny little town in the west of Victoria (Australia).
I am new to metalshaping and about to commence a full Restoration / Modification of my 1962 EK Holden, and therefore need to learn a lot to make this project successful. I have decided to learn and do as much as possible myself rather than pay someone else to do it for me, that way although it may not be perfect, I will have gained the skills for life, and the pride of my work in the vehicle. I also love to see the genius of some of the creations and tools used on here and what can be achieved. I found this site by searching for information on how to repair rust / make vehicle panels. Looking forward to hanging out with you guys! Cheers M@
__________________
Matt! - new to metalshaping and willing to learn! 
|
|
#2
04-12-2012, 09:35 PM
|
||||
|
||||
Matt, welcome and thanks for the introduction. Lots of information here to help you get started with metal shaping. Thanks for joining us.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#4
04-13-2012, 12:13 AM
|
|||
|
|||
|
HI Matt and welcome to AllMetalshaping
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#6
04-13-2012, 04:48 AM
|
|||
|
|||
|
Hi Matt,
Welcome to the site. I'm sure you can find all the info you need here. Cheers Steve
__________________
Steve ærugo nunquam dormit
|
 |
|
|
Hybrid Mode
