|
|
|
#1
02-17-2011, 07:51 PM
|
|||
|
|||
New guy in town
Good evening,
Where to start, I guess the beginning. Since 7th grade I’ve been in love with metal working, but in 8th grade I realized wood was a much easier medium to work with. A lot of my project of the past two decades have been wood based, but metal was always in the back of my mind. Three years ago I bought Miller Syncrowave 200 and a semester of TIG welding at the local community college. Last year I bought a set of Martin hammers & dollies I also bought a shrinking disc. My last two projects were an OTC 17½ Twin Ram press http://www.machinistweb.com/forum/showthread.php?t=1000 and freshening up an old Atlas lathe http://www.machinistweb.com/forum/showthread.php?t=1409. I hope I will make some new friend and learn to be a tin pecker. Bill
__________________
Bill 
|
|
#2
02-17-2011, 08:05 PM
|
||||
|
||||
|
Welcome Bill. There are several active members in your neck of the woods.
__________________
Kerry Pinkerton
|
|
#3
02-17-2011, 08:12 PM
|
|||
|
|||
|
Welcome to Allmetalshaping!! You'll get alot of use out of the lathe and press doing the metalshaping. Nice job on the machines!! I have a lathe just like that, same color and all. Not that clean though
 . It's a nice machine.
__________________
Jeff Dyce Hell, there are no rules here - we're trying to accomplish something. Thomas A. Edison
|
|
#4
02-18-2011, 10:08 AM
|
||||
|
||||
|
Bill, welcome to the site and thanks for the introduction. Hope you enjoy it here. Thanks for joining us.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
 |
|
|
Linear Mode
