|
|
|
#1
05-12-2016, 07:00 PM
|
|||
|
|||
Newbie from the UK
Hi,
Just joined and looking forward to learning more about crafting metal and hopefully being able to contribute to discussions. I can stick and arc weld ......but I am, by no means, that good. I also would like to blade smith, got a large old anvil that is just begging to be used and a partially constructed forge I started last year.......really need to pull my finger out and start bashing some steel.  All the best David 
|
|
#2
05-12-2016, 08:29 PM
|
||||
|
||||
|
Hello David and welcome to the site.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
05-13-2016, 11:40 AM
|
||||
|
||||
|
Since 2011.
Look in the top right corner of each persons post and you will see each persons join date, location, and how many posts they have made.  Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#5
05-13-2016, 05:58 PM
|
|||
|
|||
|
Hi David welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
