View Single Post
  #32  
Old 06-22-2014, 02:24 AM
Peter Tommasini Peter Tommasini is offline
MetalShaper of the Month May 2013, Dec 2013
 
Join Date: Apr 2011
Location: Melbourne,Victoria, Australia
Posts: 7,733
Default

Quote:
Originally Posted by Kabous View Post
Dont want to make heavy weather out of this issue but I want to understand the method used.

I have downloaded the video because in the next couple of months I am going to start on the body panels of a Cobra and fit them on the buck I already made, thus the interest.

Towards the end of the video there is 4 pics of which the first shows how the skew panel is bend straight. The next pic looks like the panel is being held down on the Cobra by their fingertips. The third shows marks of diagonal wheeling on the panel which seems to take care of the slight rise in the middle because the panel lies quite flat on the body.

So is that how you flatten out too high a crown, by diagonally wheeling it?


I do not like to make too many comments on other fellow metalshapers methods to shape panels, after all some methods work and some do not. I personally would not attempt to wheel a panel with that much shape that way.
Peter
__________________
P.Tommasini

Metalshaping tools and dvds
www.handbuilt.net.au

Metalshaping clip on youtube
http://www.youtube.com/watch?v=WEAh91hodPg

Making Monaro Quarter panel:
http://www.youtube.com/watch?v=KIpOhz0uGRM

Last edited by Peter Tommasini; 06-22-2014 at 08:04 AM.
Reply With Quote