View Single Post
Old 09-08-2021, 11:14 PM
Hotflint Hotflint is offline
Join Date: Dec 2019
Location: Calgary, Alberta, Canada
Posts: 51

I took a bit of a hiatus from the Pontiac to deal with some family issues and the health of some loved ones. To roll myself back into the groove I built a holder to go on the wall to carry my body sweeps. These were purchased from imperial wheeling machines.

The perimeter of the holder is 2X4s from an old picnic table that my neighbor was throwing out. I layed out and slotted the 2x4s while they were clamped together, with the skil saw

Here I am just laying it out to make sure everything came out relatively square. I also took a measurement on how high the #50 stuck out and trimmed the wood frame to be flush with it.
Reply With Quote