Thread
:
AllMetalShaping Hall of Fame
View Single Post
#
1
05-29-2009, 07:14 PM
Kerry Pinkerton
Administrator
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,321
AllMetalShaping Hall of Fame
This thread will document the metalshaper of the month winners. One of the admin's will update this post each month.
May 2009 - David Gardiner:
June 2009 - Ian Woods:
August 2009 - Ken Bert:
http://allmetalshaping.com/showthread.php?t=4119
October 2009 - Chris Bspoke:
November 2009 - Robert Kolenda:
December 2009 - Steve Hamilton:
January 2010 - Ron Lile:
February 2010 - Uncle Johnny:
March 2010 - Patman:
April 2010 - LinEl:
May 2010 - Grant Leeser:
June 2010 - Blake Tomlinson:
July 2010 - Sataus:
August 2010 - Dave Hatcliffe:
September 2010 - Gene Olson:
October 2010 - Ben van Berlo:
MSTOM-10-10.jpg
November 2010 - Emile Barts:
Emile1.jpg
December 2010 - Sollis:
January 2011 - Jeff Dyce:
MSOTM-01-11.jpg
February 2011 - Robert McCartney:
MSOTM-02-11.jpg
http://allmetalshaping.com/showthread.php?t=2154
March 2011 - Ken Burt
MSOTM-03-11.jpg
http://allmetalshaping.com/showthread.php?t=4119
April 2011 - MarkG
MSOTM-04-11.jpg
May 2011- Steve Hamilton
June 2011- Dirk
July 2011- Ian
MSOTM-07-11.jpg
August 2011 - Ken Burt
MSOTM-08-11-Ken.jpg
September 2011 - Mark
MSOTM-09-11.jpg
http://allmetalshaping.com/showthread.php?t=4020
October 2011 - Mark
MSOTM-10-11s.jpg
http://allmetalshaping.com/showthread.php?t=4199
November 2011 - Mike
MSOTM-11-11.jpg
http://allmetalshaping.com/showthread.php?t=4557
December 2011 -
MSOTM-12-11.jpg
http://allmetalshaping.com/showthread.php?t=4627
January 2012 -
MSOTM01-12.jpg
http://allmetalshaping.com/showthrea...ghlight=bumper
Feburary 2012
MSOTM-02-12.jpg
http://allmetalshaping.com/showthread.php?t=2256
March 2012
MSOTM-03-12.jpg
http://allmetalshaping.com/showthread.php?t=4928
APRIL 2012
MSOTM-04-12.jpg
http://www.allmetalshaping.com/attac...3&d=1332884029
MAY 2012
MSOTM-05-12.jpg
http://www.allmetalshaping.com/showthread.php?t=5771
JUNE 2012
MSOTM-06-12.jpg
http://allmetalshaping.com/showthread.php?t=5864
JUNE 2012
MSOTM-07-12.jpg
http://allmetalshaping.com/showthread.php?t=5869
AUGUST 2012
MSOTM-08-12.jpg
http://allmetalshaping.com/showthread.php?t=6398
September 2012
MSOTM-09-12.jpg
http://allmetalshaping.com/showthread.php?t=2799
October 2012
MSOTM-10-12.jpg
http://allmetalshaping.com/showthread.php?t=6834
November 2012
MSOTM-11-12.jpg
http://allmetalshaping.com/showthread.php?t=6631
December 2012
MSOTM-12-12.jpg
http://allmetalshaping.com/showthread.php?t=7370
January 2013
MSOTM-01-13.jpg
http://allmetalshaping.com/showthread.php?t=7152
Febuary 2013
MSOTM-02-13.jpg
http://allmetalshaping.com/showthread.php?t=5778
March 2013
MSOTM-03-13s.jpg
http://allmetalshaping.com/showthread.php?t=7740
April 2013
MSOTM-04-13.jpg
http://allmetalshaping.com/showthread.php?t=8028
May 2013
MSOTM-05-13.jpg
http://allmetalshaping.com/showthread.php?t=8474
June 2013
MSOTM-06-13.jpg
http://allmetalshaping.com/showthreadwow.php?t=7396
July 2013
MSOTM-07-13.jpg
http://allmetalshaping.com/showthread.php?t=8609
August 2013
http://allmetalshaping.com/showthread.php?t=8885
September 2013
http://allmetalshaping.com/showthread.php?t=9339
October 2013
http://allmetalshaping.com/showthread.php?t=9337
November 2013
http://allmetalshaping.com/showthread.php?t=8590
December 2013
http://allmetalshaping.com/showthread.php?t=10072
January 2014
http://allmetalshaping.com/showthread.php?t=9590
February 2014
http://allmetalshaping.com/showthread.php?t=9694
March 2014
http://allmetalshaping.com/showthread.php?t=7301
April 2014
http://allmetalshaping.com/showthread.php?t=2838
May 2014
http://allmetalshaping.com/showthread.php?t=4281
June 2014
Custom Metalshapers Ltd
http://allmetalshaping.com/showthread.php?t=10915
July 2014
Tom Polter
http://allmetalshaping.com/showthread.php?t=7900&page=3
August 2014
Ozi Jim
http://allmetalshaping.com/showthread.php?t=7366
September 2014
Bernhard
http://allmetalshaping.com/showthread.php?t=9590
October 2014
Kent White
http://allmetalshaping.com/showthread.php?t=12287
November 2014
Scott and Cooper
http://allmetalshaping.com/showthread.php?t=12433
December 2014
David Gardiner
http://allmetalshaping.com/showthread.php?t=11518
January 2015
Greg Smith
http://allmetalshaping.com/showthread.php?t=11495
February 2015
Bob Adame
http://allmetalshaping.com/showthread.php?t=12853
March 2015
Marcus
http://allmetalshaping.com/picture.p...ictureid=16980
April 2015
Julian
http://allmetalshaping.com/showthread.php?t=13272
May 2015
Jim Hery
http://allmetalshaping.com/showthrea...ghlight=africa
June 2015
Axle Kloehn
http://allmetalshaping.com/showthread.php?t=12531
July 2015
Mike Stinson at Ace Chassis
http://allmetalshaping.com/showthread.php?t=13534
August 2015
Steve (Toreadorxlt)
http://allmetalshaping.com/showthread.php?t=10521
September 2015
Ray (Scrapmaker)
http://allmetalshaping.com/showthread.php?t=3874
October 2015
Janne Jarvinen
http://allmetalshaping.com/showthread.php?t=12541
November 2015
Ron Nadia
http://allmetalshaping.com/showthread.php?t=14322
December 2015
Jeffry
http://allmetalshaping.com/showthread.php?t=14405
January 2016
Ben
http://allmetalshaping.com/showthread.php?t=14332
February 2016
SATAUS (Scott)
http://allmetalshaping.com/showthread.php?t=11291
March 2016
(MotoMike43) Mike Phillips
http://allmetalshaping.com/showthread.php?t=14791
April 2016
Kent White
http://allmetalshaping.com/showthread.php?t=15005
May 2016
Mark G
http://allmetalshaping.com/showthread.php?t=15027
June 2016
Andrew Slater
http://allmetalshaping.com/showthread.php?t=15244
July 2016
Paul-s
http://allmetalshaping.com/showthread.php?t=14918
Aug 2016
Matt
http://allmetalshaping.com/showthread.php?t=13610
Sept. 2016
Ben
http://allmetalshaping.com/showthread.php?t=15545
October 2016
Mike
http://allmetalshaping.com/showthread.php?t=7593
November 2016
Jeff Dyce
http://allmetalshaping.com/showthread.php?t=15574
December 2016
Jack
http://allmetalshaping.com/showthread.php?t=14068
January 2016
Steve
http://allmetalshaping.com/showthrea...t=15520&page=3
February 2017
Matt
http://allmetalshaping.com/showthread.php?t=16063
March 2017
Mike Mettelka
http://allmetalshaping.com/showthread.php?t=16316
April 2017
http://allmetalshaping.com/showthread.php?t=16395
May 2017
http://allmetalshaping.com/showthread.php?t=16651
June 2017
http://allmetalshaping.com/showthread.php?t=16769
july 2017
Jeff
http://allmetalshaping.com/showthread.php?t=16426
August 2017
Tim Millward
http://allmetalshaping.com/showthread.php?t=10392
September 2017
Jim Hery
http://allmetalshaping.com/showthread.php?t=11166
October 2017
Paul S
http://allmetalshaping.com/showthread.php?t=16998
November 2017
Steve
http://allmetalshaping.com/showthread.php?t=17060
December 2017
Steve
http://allmetalshaping.com/showthread.php?t=17272
January 2018
Joel Heinke
http://allmetalshaping.com/showthread.php?t=2264
February 2018
Joris Rockx
http://allmetalshaping.com/showthread.php?t=17212
March 2018
Dane Macik
http://allmetalshaping.com/showthread.php?t=17505
April 2018
Lee
http://allmetalshaping.com/showthread.php?t=16136
May 2018
David Hamer
http://allmetalshaping.com/showthread.php?t=17659
June 2018
Michael Henry Sutton
http://allmetalshaping.com/showthrea...=michael+Henry
July 2018
Robert McCartney
http://allmetalshaping.com/showthread.php?t=15021
Aug 2018
Bill Tromblay
http://www.allmetalshaping.com/showthread.php?t=18066
Sept 2018
Matt
http://allmetalshaping.com/showthread.php?t=18252
Oct 2018
Carl
http://allmetalshaping.com/showpost....62&postcount=1
Nov 2018
Richard
http://allmetalshaping.com/showthread.php?t=18395
Dec 2018
Onorius
http://allmetalshaping.com/showthread.php?t=17460
Jan 2019
Will Cronkrite
http://allmetalshaping.com/showthread.php?t=10181
Feb 2019
William Pointer
http://allmetalshaping.com/showthread.php?t=18583
Mar 2019
Neil B
http://allmetalshaping.com/showthread.php?t=11485
April 2019
Bernhard
http://allmetalshaping.com/showthread.php?t=14775
May 2019
July 2019
Tobi/DFL
http://allmetalshaping.com/showthread.php?t=18864
August 2019
Steve (toreadorxlt)
http://allmetalshaping.com/showthread.php?t=19066
September 2019
Jack 1957
http://allmetalshaping.com/showthread.php?t=14068
October 2019
Jim Stabe
http://allmetalshaping.com/showthread.php?t=1850
November 2019
Ray (Scrap Maker)
http://allmetalshaping.com/showthrea...pmaker&page=11
December 2019
Pugsy (123pugsy)
http://allmetalshaping.com/showthread.php?t=154
January 2020
AC Button (cliffrod)
http://allmetalshaping.com/showthread.php?t=18299
February 2020
Steve Kioukis (qkiss)
http://www.allmetalshaping.com/showthread.php?t=13690
March 2020
Marcus (Gojeep)
http://allmetalshaping.com/showthread.php?t=12411
April 2020
Jaroslav
http://allmetalshaping.com/showthread.php?t=19483
May 2020
Eugene (Reno)
http://allmetalshaping.com/showthread.php?t=18551
June 2020
Mike Motage
http://allmetalshaping.com/showthread.php?t=7593
July 2020
Kent White
http://allmetalshaping.com/showthread.php?t=19672
August 2020
Antoine_P
http://allmetalshaping.com/showthread.php?t=18852
September 2020
Robert Mccartney
http://allmetalshaping.com/showthread.php?t=19947
October 2020
Chris (metalmarks)
http://www.allmetalshaping.com/showthread.php?t=19393
November 2020
TheRodDoc Richard Crees
http://allmetalshaping.com/showthread.php?t=1079
December 2020
Stretch (Matt)
https://allmetalshaping.com/showthread.php?t=20083
January 2021
Skintkarter (Richard)
https://allmetalshaping.com/showthread.php?t=19785
February 2021
slobitz (Stan Lobitz )
March 2021
SATAUS (Scott)
https://allmetalshaping.com/showthread.php?t=19718
April 2021
Fabrycation (brycen Smith)
https://allmetalshaping.com/showthread.php?t=19160
May 2021
heinke (Joel)
https://allmetalshaping.com/showthread.php?t=18058
June 2021
Ian Staples
https://allmetalshaping.com/showthread.php?t=20199
July 2021
Chris Woolley
https://allmetalshaping.com/showthread.php?t=20405
Aug 2021
Dane Macik
https://allmetalshaping.com/showthread.php?t=17861
September 2021
Jaroslav
https://allmetalshaping.com/showthread.php?t=19899
October 2021
jeba
https://allmetalshaping.com/showthread.php?t=20274
November 2021
Keith (Keith Daleen)
https://allmetalshaping.com/album.ph...ictureid=21113
December 2021
Metal shaper of the year
Jack (Jack 1957)
https://allmetalshaping.com/showthre...ight=Jack+1957
January 2022
Nate S
https://allmetalshaping.com/showthre...highlight=Nate
February 2022
123Pugsy (Pugsy)
https://allmetalshaping.com/showthre...ighlight=pugsy
March 2022
(Cliffrod) AC Button111
https://allmetalshaping.com/showthread.php?t=19227
April 2022
Jerry Gulley
May 2022
fciron (Lewis Meyer)
https://allmetalshaping.com/showthre...ghlight=fciron
June 2022
Gojeep (Marcus)
https://allmetalshaping.com/showthread.php?t=12411
July 2022
dwmh (David Hamer)
https://allmetalshaping.com/showthre...ght=deco+clock
Aug 2022
Matte Keene (Stretch)
https://allmetalshaping.com/showthread.php?t=20541
Sept 2022
Antonie_P
https://allmetalshaping.com/showthread.php?t=20624
October 2022
Jeff (sandmanred)
https://allmetalshaping.com/showthread.php?t=20442
November 2022
Jaroslav
https://allmetalshaping.com/showthread.php?t=20028
December 2022
Sune Oestergaard
https://allmetalshaping.com/showthread.php?t=21216
January 2023
Kent White (crystallographic)
https://allmetalshaping.com/showthread.php?t=20912
February 2023
A12pilot (Dave)
https://allmetalshaping.com/showthread.php?t=20797
March 2023
Silvio Kuhnast
https://www.allmetalshaping.com/showthread.php?t=21526
April 2023
Mike Motage
https://allmetalshaping.com/showthread.php?t=7593
May 2023
Trent Hailey
https://allmetalshaping.com/showthread.php?t=21507
June 2023
Dan Todorow
https://www.allmetalshaping.com/showthread.php?t=21651
July 2023
Paul-S
https://allmetalshaping.com/showthread.php?t=21617
August 2023
Marcus (Gojeep)
https://allmetalshaping.com/showthread.php?t=12411
September 2023
Spencer (275nart)
https://allmetalshaping.com/showthread.php?t=21695
October 2023
Reno (Eugene)
https://allmetalshaping.com/showthread.php?t=19911
November 2023
pplace (Dane Macik)
https://allmetalshaping.com/showthread.php?t=17861
December 2023
805maker (Ryan Reynolds)
https://allmetalshaping.com/showthread.php?t=21933
February 2024
boltboy49
(Al )
https://allmetalshaping.com/showthread.php?t=21582
March 2024
Scoob (Steve)
https://allmetalshaping.com/showthread.php?t=21831
Last edited by Steve Hamilton; 03-01-2024 at
04:10 PM
.
Kerry Pinkerton
View Public Profile
Send a private message to Kerry Pinkerton
Find all posts by Kerry Pinkerton