IMG_1388.jpgAdapter now fits flush
IMG_1342.jpgI cut a 5/8 x 11 nut in haft because the standard nut is too thick. Thinner nuts are available thru supplies like McMasterr Carr and others but I didn't think I needed a quantity of 25 at the time.
IMG_1346.jpgNow I have 2
IMG_1391.jpgMounted to the grinder it is not quite ready yet
IMG_1398.jpg I first like to break it in by maying a few passes on a piece of clean steel plate to start the bevel
IMG_1399.jpg A side view of the bevel.