View Single Post
  #14  
Old 02-04-2021, 07:01 PM
Bibbt Bibbt is offline
Member
 
Join Date: Jan 2021
Location: San Antonio,Texas
Posts: 20
Default New tips and test weld pics

So today I bought and installed a large flat tip on the bottom tong of my Miller spot welder. I ran some tests and the flat tip made a big difference. I have some photos of the front and back side for the experts to look at and hopefully give me some feedback. They still aren't as good as I would like but they are much better than my first attempt. I have my timer turned down to roughly 1/4 second which is a short as I could make it and get any consistency. My gut tells me my welder has too much current for what I am doing. In the photos, the 6 welds at the far right side of the material are my final welds and the best I could muster. I had to peel the metal off the top tip after almost every single weld. I'm thinking it shouldn't be that way. Please take a look and tell me what you think.
Thanks,
Bibb in San Antonio

IMG_2348.jpg

IMG_2349.jpg

IMG_2347.jpg
__________________
Bibb

Last edited by Steve Hamilton; 02-04-2021 at 07:42 PM. Reason: spelling error
Reply With Quote