Thread: Unigoggles
View Single Post
  #7  
Old 03-07-2021, 10:43 PM
Reno Reno is offline
MetalShaper of the Month May 2020. October 2023
 
Join Date: Nov 2018
Location: Reno, NV
Posts: 331
Default

If these are a failure point I thought I would try to make one. I used 1/4" aluminum rod. I flattened the end and then drilled and tapped the end for the spring retainer screw before I made the last bend.

IMG_20210307_122349.jpg

IMG_20210307_123848.jpg

IMG_20210307_134220.jpg
__________________
Eugene
Reply With Quote