Welcome to the forum, Jack. "Best" is obviously highly subjective. I would suggest you start reading here if you haven't already:
http://allmetalshaping.com/forumdisplay.php?f=29
I live about an hour away from you: if you want to see and try one I built according to Kerry's design with Hoosier anvils, PM me. Some background on my wheel here: http://allmetalshaping.com/showthrea...l+construction there are some photos on page two of the thread.
__________________
Mark from Illinois
Last edited by weldtoride; 09-28-2015 at 11:51 PM.
Reason: replaced "plans" with "design" for descriptive accuracy
|