All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   Hi from UK South Coast (https://allmetalshaping.com/showthread.php?t=7361)

fiatguy 11-18-2012 05:57 AM

Hi from UK South Coast
 
Hi,

Just joined the forum. I am just about to start the body restoration of a 1968 Fiat Dino Coupe. Previous experience of repares was limited to replacing pre manufactured panels but these don't realy exist for the Fiat so have joined a few forums recently to get some tips on making panels. From what i have already seen in this forum I should learn a fair bit.

John D

thingsthatfly2 11-18-2012 09:29 AM

welcome john. be sure to post pictures of your fiat!

HEATNBEAT 11-18-2012 12:41 PM

Hi John and welcome!:)

Z5Roadster 11-18-2012 01:20 PM

Hi John, plenty of guys here willing to share their skills
Welcome to the site. (which part of the south coast you from)

David Gardiner 11-18-2012 02:14 PM

Welcome to the forum John, the good news is that you don't need to buy a workshop full of machines to make patch panels. I have several threads on here that show step by step how to make parts with hand tools.

Here are some links in case you are interested...

http://allmetalshaping.com/showthread.php?t=4598

http://allmetalshaping.com/showthread.php?t=3136

http://allmetalshaping.com/showthread.php?t=1096

David

Peter Tommasini 11-18-2012 06:03 PM

HI John welcome to the forum
Peter


All times are GMT -5. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.