All MetalShaping - Hi from Tasmania

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Hi from Tasmania (https://allmetalshaping.com/showthread.php?t=7288)

Tasibrett

11-05-2012 03:52 PM

Hi from Tasmania

Hi all,a friend is about to get a English wheel to make panels for a car (Largo Talbert) he is building, and as it is being done in my workshop I have joined so I can get help if needed when things go wrong :)
My experience at this is at present limited to what I have learnt from u tube so a steep learning curve awaits me, but I do have a fairly good collection of scrap to learn on and I never give up.
Brett

David Gardiner

11-05-2012 04:47 PM

Hi Brett, welcome to the forum.

David.

HEATNBEAT

11-05-2012 05:00 PM

Hi Brett and Welcome!:D

Peter Tommasini

11-05-2012 10:28 PM

HI Brett welcome to the forum
Peter

pitcuz

11-06-2012 08:38 AM

Welcome Brett.
Mike

Resto Rod Race

11-10-2012 05:01 AM

Hi Brett, i just moved from Adelaide to Launceston, where you located?

All times are GMT -5. The time now is 06:02 AM.