new bloke from tasmania
 

gday
im justin and ive been into steel since i was a kid.
im passionate about hot rods as well.im not real confident
with sheet metal so i would like to learn some tricks
thanks

Justin

Hi Justin and welcome!

Hello Justin welcome to allmetalshaping.

David

Welcome Justin,
You will learn plenty of sheetmetal trick on here.
Cheers Steve.

Hi Justin, plenty of aussies on here and a few down your way. which part of tassie you from.
Cheers

Gidday Justin, Great site to learn from. Hope you guys are not as cold and damp as we are in Melbourne right now. (suspect you are colder and wetter)
Happy Hammering!

Garrick Jones