Hi, it's Barry
 

Hi My name's Barry and I'm from St Francois Xavier, Manitoba, just west of Winnipeg. If you were on the other forum you may remember my questions to Wray about a 2024 T3 alum. panel that I was trying to wheel. I sometimes think my request for "wheeling patterns" almost drove him to abandon the forum...it was around the time he stepped back a bit. Hope I don't repeat with more inane questions. Currently working on rust repair of a 57 Ranchero....I'll be asking for help on patch panels. Barry Levandosky

Hi & Welcome Barry from the other one;)
Ask your questions - there's plenty help here. (I'm not on much now due to some personal crap going on, but there's a bunch of others who will help even if you do drive them a little crazy:lol:)

Barry L, welcome to the site. Hope you can post some pictures of your 57 Ranchero. If you have questions ask and someone will try to help you. Thanks for the introduction.

Barry;

Just found this, would definitely like to connect with you again. have built an English wheel and bead roller etc. hope we can connect.
Dwaine (used sell Eastwood)

Barry;
Hope you are doing well. give me a call at lowbux@mymts.net or 204- 785-3123 would like to reconnect with you. Am doing some metalshaping, always enjoyed my time with you.
Hope all is well.
Dwaine Carlson

Ranchero
 

Hope all is well. Give me a call at204-785-3123 or email at lowbux@mymts.net so we can reconnect, I would love to help you on your Ranchero.
Dwaine Carlson
204-785-3123:)

Hi Barry welcome to the forum
Peter

Hi Barry and Welcome.:)
Cheers John