All MetalShaping - Kid from PA

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Kid from PA (https://allmetalshaping.com/showthread.php?t=2227)

This would be my introduction. I'm Nate, I live in eastern PA and work in a restoration shop in New Jersey. I do metal shaping and fabrication there, and have a shop set up in my Dad's basement with all my equipment. I have taken Fay's seminar and the things I know about metal shaping are from him and fumbling through it myself. I have a Pullmax and Milwaukee planishing hammer with a fabbed pedestal and a CP handheld. I have a Dynasty 200DX tig, Monarch 10ee and step pulley bridgeport. I am currently working on making power hammer dies at home for the Pettingell hammers I am setting up at work and also dies for myself for when I get my own hammer. I guess that is it.

Attachment 7686

Attachment 7687

Attachment 7688

Attachment 7689

Attachment 7690

Attachment 7691

Attachment 7692

Attachment 7693

Attachment 7694

Attachment 7695

Thanks for the intro Nate. I expect there will be some members going to change their underwear after seeing the double head power hammer....:eek::eek:

Quote:

Originally Posted by Kerry Pinkerton (Post 23473)

Thanks for the intro Nate. I expect there will be some members going to change their underwear after seeing the double head power hammer....:eek::eek:

Haha, no problem. I started setting those up in the begining of September. We didn't have a pedestal so just fabbed one. Prior to that they were doing a good job of holding up the radio, but I saw some more potential. Hopefully I'll be setting up my own hammer soon.

Attachment 7696