All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   newb - ZERO metal shaping skills! (https://allmetalshaping.com/showthread.php?t=15368)

wlsmoku 06-05-2016 01:31 PM

newb - ZERO metal shaping skills!
 
have no good tools, and zero experience. I am a union pipefitter, have some certs so typical welding is not a problem......only thing is - I have never truly learned to shape metal. here to start off with basics like what is a good beginner/intermediate bead roller and english wheel and learn to make some nice pieces for my cars. looking forward to learning from you all :)

Peter Tommasini 06-05-2016 06:57 PM

Hi Jerry welcome to the forum
Peter

crystallographic 06-05-2016 07:37 PM

Quote:

Originally Posted by wlsmoku (Post 126556)
have no good tools, and zero experience. I am a union pipefitter, have some certs so typical welding is not a problem......only thing is - I have never truly learned to shape metal. here to start off with basics like what is a good beginner/intermediate bead roller and english wheel and learn to make some nice pieces for my cars. looking forward to learning from you all :)

Welcome, pipefitter.
(psst ... if you've wrapped foil over a baked potato you have the rudiments .... ;) )

Richard-S 06-06-2016 06:04 PM

Quote:

(psst ... if you've wrapped foil over a baked potato you have the rudiments .... ;) )
Then all that's left to do is to planish it.

Richard


All times are GMT -5. The time now is 09:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.