All MetalShaping - Hi from Brisbane, Australia

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Hi from Brisbane, Australia (https://allmetalshaping.com/showthread.php?t=14430)

Craig777

11-14-2015 08:23 PM

Hi from Brisbane, Australia

Hi,
After spending hours watching YouTube videos of the different ways people approach the same task, I'm keen to jump in and start trying to form my own alloy body panels. I have a Shelby Cobra replica and an Austin Healey 3000, so there are lots of options for panels to work on.
I'm moving to a property with a large shed, so there is a lot of equipment that I'll need to fill the shed with to achieve the goal...
Cheers

Gojeep

11-15-2015 04:21 AM

Welcome to the forum Craig. You will get plenty of help here. :)

steve.murphy

11-15-2015 02:54 PM

Welcome from another Queenslander Craig.

Peter Tommasini

11-15-2015 06:00 PM

Hi Craig welcome to the forum
Peter

jake.barton

11-16-2015 06:05 AM

Welcome to the forum Craig (I'm QLD also - bit further west though).

Quote:

Originally Posted by Craig777 (Post 119099)

Hi,
there is a lot of equipment that I'll need to fill the shed with to achieve the goal...
Cheers

Dangerous comment to make around here mate..... I'm sure you have seen some of Peter's tools by now :D.

Regards Jake

petersod

11-16-2015 08:30 AM

Welcome from another Brissy member.

Dominic

Jere	11-16-2015 11:40 AM

Hello Craig and welcome.

Jere

All times are GMT -5. The time now is 12:09 PM.