All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   New to Metal Shaping (https://allmetalshaping.com/showthread.php?t=13993)

Bosscoe 08-05-2015 02:50 AM
New to Metal Shaping
 
Hi my name is Ross I’m from Melbourne Australia and just starting to try to learn some metal shaping. I am restoring a 56 Ford F100 and would like to get hints from the people in the know I’m sure I will have loads of questions and hoping to learn as much as I can here.

Jere 08-05-2015 11:06 AM
Hello Ross and welcome. I am restoring a 53 F100 now. Mine has a 351c and C6, what are you using for power?

Jere

Peter Tommasini 08-05-2015 07:13 PM
Hi Ross welcome to the forum
Peter

skintkarter 08-05-2015 09:35 PM
Quote:
Originally Posted by Bosscoe (Post 115691)
Hi my name is Ross I’m from Melbourne Australia and just starting to try to learn some metal shaping. I am restoring a 56 Ford F100 and would like to get hints from the people in the know I’m sure I will have loads of questions and hoping to learn as much as I can here.
Hi Ross. Lot's of good info and helpful folk on here (I'm not one of them...). If you are new and trying to learn some metalshaping - and you are from Melbourne... best advice is try to attend one of Peter Tommasini's workshops. Don't tell him I said this, but he is a bit of a metalshping god....

Gojeep 08-06-2015 05:58 AM
Welcome mate. A good bunch on here.

Bosscoe 08-21-2015 04:31 AM
Thanks for the warm welcomes
Jere I'm am going to run a fuel injected 302 and 4 speed auto box out of a 94 ford falcon and yes Peter is a metal guru I have seen his work old school tradie


All times are GMT -5. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.