All MetalShaping - Introduction, New Member Gordon from Dublin

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Introduction, New Member Gordon from Dublin (https://allmetalshaping.com/showthread.php?t=11397)

ONI741

04-19-2014 02:09 PM

Introduction, New Member Gordon from Dublin

Hi Folks,
My name is Gordon and I live in Dublin, Ireland. I have a Morgan 4/4 for which I'm making a header rail for the soft top. I'm planning to use U-channel aluminium which I will need to learn how to bend. I see on this forum someone has done this, so was hoping to get some help.

Regards

Gordon

galooph

04-19-2014 05:12 PM

Welcome to the forum, Gordon :)

Jere	04-19-2014 06:54 PM

Hello Gordon and welcome.

Jere

HEATNBEAT

04-19-2014 07:28 PM

Hi Gordon and welcome!:)

David Gardiner

04-20-2014 08:45 AM

Welcome to allmetalshaping. You will need to aneal the channel and work the channel gradually.

David

All times are GMT -5. The time now is 08:15 AM.