All MetalShaping

All MetalShaping (https://www.allmetalshaping.com/index.php)
-   Automotive Projects (https://www.allmetalshaping.com/forumdisplay.php?f=20)
-   -   SS100 (Jaguar) (https://www.allmetalshaping.com/showthread.php?t=20248)

Leepac1 01-19-2021 01:08 PM

SS100 (Jaguar)
 
Hi,
Does anyone know where I might get some detailed drawings for this car body, I have a rolling chassis that I would like to build a body on, thank you in advance,
Andrew.

Gareth Davies 01-19-2021 01:31 PM

Thereís a place in Coventry called X K Engineering who might be able to help, or point you in the right direction. It might be a starting point.

Leepac1 01-19-2021 01:39 PM

Thank you Gareth.

Gareth Davies 01-19-2021 02:12 PM

This thread might be of help but you would be unlikely to contact David Gardiner through this forum as he no longer contributes to it.

https://www.allmetalshaping.com/show...ighlight=SS100

Leepac1 01-19-2021 02:33 PM

Hi Gareth,
I did send David an email a while ago now offering to buy whatever information he was willing to let me have, I still await an answer some months later, thank you once again all the same,
Andrew.

Gareth Davies 01-19-2021 02:50 PM

Andrew,

I follow a page on Facebook called Designing, Building and Making Bucks, Forms, Armatures For Metalshaping which might be worth a look to glean some ideas from.

I donít think youíll get much help from David Gardiner if Iím being honest so youíre faced with doing some detailed research of your own.

Leepac1 01-19-2021 04:29 PM

Hi Gareth,
Once again thank you very much, I will take a look at that,
Andrew.
Found that, thank you.

Pehr 01-19-2021 05:31 PM

Suffolk Sportscar
 
Unfortunately Suffolk Sportscar has been forced in liquidation by JLR.
Perhaps their build manual is of some help?
https://www.manualslib.com/manual/97...?page=6#manual

Leepac1 01-20-2021 02:10 PM

Quote:

Originally Posted by Pehr (Post 166791)
Unfortunately Suffolk Sportscar has been forced in liquidation by JLR.
Perhaps their build manual is of some help?
https://www.manualslib.com/manual/97...?page=6#manual

Hi Pehr,
Thank you very much for that, kind regards,
Andrew.


All times are GMT -5. The time now is 08:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.