New Member
 

Steve Bowden here

Just got back from Wills Redneck Roundup. Seen a lot of familiar faces and some new ones. It was a great time. I was advised to Join here. Love metal shaping. Building muscle cars and gaining more interest in building hotrods now. Looking forward to making additional friends on here.

Welcome Steve, nice seeing you at the Round Up, glad that you joined, Dan

Great meeting you. Welcome aboard!

Thank you.

Glad you joined as well- welcome to the forum, Steve.

Steve, took some pictures of the "cog" on the Lennox tonight in case you wanted to make one for yours... Need to resize and will post them tomorrow..

https://lh3.googleusercontent.com/kp...i=w649-h866-no


https://lh3.googleusercontent.com/tE...f=w718-h956-no


https://lh3.googleusercontent.com/-H...5=w718-h956-no


https://lh3.googleusercontent.com/cv...W=w718-h956-no


https://lh3.googleusercontent.com/zv..._=w718-h956-no


https://lh3.googleusercontent.com/mF...y=w718-h956-no


https://lh3.googleusercontent.com/ML...K=w718-h956-no


https://lh3.googleusercontent.com/Wj...9=w718-h956-no


https://lh3.googleusercontent.com/oz...T=w718-h956-no

Great. Thanks Robert. Appreciate the detailed pictures. That does not look hard to make.

Looks like I missed length of the cog, I'll get that tonight.. Groove in middle is where that small plate drops in to keep things in place.

Last measurement:


https://lh3.googleusercontent.com/0x...z=w649-h865-no