All MetalShaping

All MetalShaping (https://www.allmetalshaping.com/index.php)
-   Introductions (https://www.allmetalshaping.com/forumdisplay.php?f=7)
-   -   John Foster (https://www.allmetalshaping.com/showthread.php?t=20764)

John Foster 11-09-2021 04:33 PM

John Foster
 
Hello all.

I am from Ontario Canada, I am mainly a wood worker, but I occasionally tackle metal projects for myself, my children or the community group I am involved with.

In my own shop I have some basic power tools: nibbler, drill press, angle grinder, cut-off saw, 120V MIG welder, ancient lathe etc. and the usual hand tools: snips, hacksaws, punches, chisels etc.

At work I have access to a brake, shear, 240V MIG welder, stick welder, metal cutting band saw.

This summer we built a wood fired pizza oven and an out door stone fireplace; my goal this winter is to make copper chimney caps for both of them.

I will probably be looking for lots of advice.

Thanks

John

metal manny 11-09-2021 11:06 PM

Welcome, John

crystallographic 11-13-2021 05:58 PM

Quote:

Originally Posted by John Foster (Post 171141)
Hello all.

I am from Ontario Canada, I am mainly a wood worker, but I occasionally tackle metal projects for myself, my children or the community group I am involved with.

In my own shop I have some basic power tools: nibbler, drill press, angle grinder, cut-off saw, 120V MIG welder, ancient lathe etc. and the usual hand tools: snips, hacksaws, punches, chisels etc.

At work I have access to a brake, shear, 240V MIG welder, stick welder, metal cutting band saw.

This summer we built a wood fired pizza oven and an out door stone fireplace; my goal this winter is to make copper chimney caps for both of them.

I will probably be looking for lots of advice.

Thanks

John


Hi John,
Welcome.


All times are GMT -5. The time now is 06:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.