My first complete car body.
2 Attachment(s)
My first complete car body.
I was asked to make a car body. Shaping sheet metal parts on a wooden frame. The objections that I never did it were rejected.:confused: With a small note - it's in a very hurry.:D So I started. Attachment 60452 Attachment 60453 |
Well that will take a few days to complete. Looks good
|
Progress pictures when you have time.:):)
I always like to see what you do and how you go about doing it. Your always thinking outside the box and coming up with unique ways of getting results.;);) |
22 Attachment(s)
Thank you for your interest. :) It's all in a hurry. The body will be aluminum. I made it a condition that I would not weld it. They agreed. All you have to do is shape.
I'll do it all from large panels. Notice the small hooks that helped me draw the line for bending the side plates. I bent the plate 30mm and it will be attached to the log from below. I bent the lower bend and shaped the side plates according to the paper template exactly according to the outline of the car. I will cut the holes for the wheels only after welding. One half of the upper part was shaped exactly to the contour. Attachment 60454 Attachment 60455 Attachment 60456 Attachment 60457 Attachment 60458 Attachment 60459 Attachment 60460 Attachment 60461 Attachment 60462 Attachment 60463 Attachment 60464 Attachment 60465 Attachment 60466 Attachment 60467 Attachment 60468 Attachment 60469 Attachment 60470 Attachment 60471 Attachment 60472 Attachment 60473 Attachment 60474 Attachment 60475 |
Great project, Jaro!
Keep us posted....;) |
Thank you. It's a nice job. I was originally supposed to make only fenders. But there are few hands ... so it ended with me.
11.8. it should be at the start of the race and in the paint ... and growl engine, so the race is with me too. :lol: Now it's about "who makes the mistake".:D:D |
12 Attachment(s)
Shaping of side plates. I used large tools for aluminum. The material does not tear. I used steel tools for the edge details. They work faster.
In the combination of Eckold and EW, I rounded the edges. I don't know if I made a mistake in carefully driving the whole panel in EW with straight wheels. To relieve stress. This will only become apparent when be the panel is precisely aligned. Attachment 60476 Attachment 60477 Attachment 60478 Attachment 60479 Attachment 60480 Attachment 60481 Attachment 60482 Attachment 60483 Attachment 60484 Attachment 60485 Attachment 60486 Attachment 60487 |
Beautiful work, jaroslav! As usual.
Tom |
3 Attachment(s)
Thank you, Tom. :) The basic shapes went well, but even more time is alignment on the ribs of the structure.
But it's already working. It's a little nervous, and I am nervous, but it works. I need to have 2 more pairs of hands and eyes. Maybe increase brain capacity .... Attachment 60491 Attachment 60492 Attachment 60493 |
Looks good! I can't wait to see more!
|
All times are GMT -5. The time now is 05:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.